You may embed a variety of reports within your add, edit, and notification layouts.  The report types that may be embedded are:

  • Column reports
  • Treegrid reports
  • Summary reports
  • Matrix reports
  • Charts (not available to embed within notification layouts at this time)
  • Geospatial reports  (not interactive heat maps)

Only shared reports or reports shared with user groups may be embedded.  Note that embedded reports are not supported on phone or tablet layouts, as there is typically less screen space to display reports alongside the user’s workflow data.

An important feature of embedded reports is that they can be linked real-time to the issue data being added or edited.  This is enabled by using the * Ask at Runtime * filter within the report definition.  When the embedded report is displayed, it looks for the value of the field displayed within the current issue on the layout when it is rendered, and uses this as the value for the * Ask at Runtime * field.  If and when the user alters this value within the rendered add or edit screen, the report is automatically regenerated to reflect the new value.

Any number of reports may be embedded within an add or edit screen, although care should be taken not to embed complex reports that might take a significant amount of time to render, as this may detract from the user’s experience.

The size and appearance of the embedded reports are controlled by layout cell attributes which are placed at the layout level (not the embedded layout).  This is explained below in the Configuration section.  The complete range of layout cell atrtibutes that can be used is as follows:

Attribute Purpose
ADMIN NOTES This is a placeholder for information purposes only.  This can be used by the administrator to document the use of the field / layout
ALTERNATE TITLE The report title is the default that will be displayed on the rendered embedded report, but this can be overridden with this attribute
DRILLDOWN TARGET This attribute is used in conjunction with the DRILLDOWN TARGET REPORT attribute.  Together they define how to handle drilldowns from the embedded report presented on the add or edit screen.  The drilldown target defines the name of the layout embedded on the screen which will contain the report that displays the drilldown results.  If this is not defined, a new browser tab is targetted for the drilldown results within the standard interface.  Within a workspace interface, a new workspace panel is generated to display the drilldown results.

The drilldown target layout must be a layout that was created with a usage of Embedded Report – Creates a layout that contains a report to be embedded within an Add or Edit screen.  There are four such layouts predefined, but you may create as many of these as you need.  The four predefined layouts are:

EMBEDDED_REPORT – Embedded Report
EMBEDDED_REPORT_1 – Embedded Report (1)
EMBEDDED_REPORT_2 – Embedded Report (2)
EMBEDDED_REPORT_3 – Embedded Report (3)

Note that you should edit any of these embedded layout types and make sure that you save an empty layout of that type.
DRILLDOWN TARGET REPORT This attribute is used in conjunction with the DRILLDOWN TARGET attribute.   Once you have the target specified, you use this attribute to nominate the specific report you want to generate.  This must be a shared public report.  You can use the * Ask at Runtime *  filter within the report definition to pick up values from the embedded report and use these while generating the drilldown report.  For example, the user might click on a cell in the embedded report which identifies a value for a specific STATUS and PRIORITY.  If these two fields are used as runtime filters in the drilldown target report, then the values from the embedded report are used as filters for the drilldown report. 
EMBEDDED REPORT NAME This is the most important attribute as this allows for the selection of the report to be embedded.  Only shared reports and reports saved for user roles can be selected.  A report must be selected with this attribute for an embedded report to be displayed
HEIGHT The height in pixels of the report, before a vertical scroll bar is displayed
REPORT FONT SIZE This attribute can be used to modify the size of the font used to generate the embedded report.  This is typically used to set a smaller font size than theremainder of the add or edit screen as reports may be voluminous.  You can either set a specific font size such as 8pt, 0.8em or 10px or use an HTML attribute name from the following table

medium

Sets the font-size to a medium size

xx-small

Sets the font-size to an xx-small size

x-small

Sets the font-size to an extra small size

small

Sets the font-size to a small size

large

Sets the font-size to a large size

x-large

Sets the font-size to an extra-large size

xx-large

Sets the font-size to an xx-large size

smaller

Sets the font-size to a smaller size than the parent element

larger

Sets the font-size to a larger size than the parent element

Using a setting from the table, or a value expressed with em has advantages as the font generated is then relative in size to the user’s personal text size setting (small, medium or large).
 
REPORT OPTIONS These provide control of the following:

  • The ability to display or suppress the Title of the embedded report as rendered on the add or edit screen
  • The placement of a Refresh button on the heading of the embedded report
  • The placement of a Drilldown button on the heading of the embedded report
  • The placement of an Add button on the heading of the embedded report
  • The placement of a Filter button on the heading of the embedded report.  Note that if you set this option, you should make sure the SIZE and HEIGHT are of sufficient size to accommodate the filter popup
  • The placement of a Mass Update button on the heading of the embedded report
  • The placement of a Report Filter button which slides out upon a mouseover action.  This displays the current report filters in a small popup
  • The placement of Expand and Collapse All buttons on the report output.  Note this only works with Summary, Matrix and Treegrid report types
  • The placement of an input box to set Additional Keyword Filters
  • An entry for the Page Size.  This will override the value stored within the saved report
SIZE The width in pixels of the report, before a horizontal scroll bar is displayed
VISIBLE IF This allows for the typical conditions to conditionally display the entire report according to the logical expression you define

Configuration

  1. Note that there are four embedded report layouts named Embedded Report, Embedded Report (1), Embedded Report (2), and Embedded Report (3) pre-created in the database. If you need to create a new layout type for embedded report. provide a fixed name and a title for the layout and choose the Embedded Report usage for the new layout type and then Add the new layout type

  2. Navigate to the Layout Selection screen within the Design Center and add the layout type you just created into the Business Area / Project and User Role where the report is to be displayed.  Again, this feature is only supported on Desktop targets

  3. This layout must be empty.  It is a placeholder only.  Create and save a layout like this

  4. We will now place a report on the Edit screen of the Customer Business Area.  Select the embedded report layout you created from the Layouts section of the Design Center.


    Note that in this case we have suppressed all the REPORT OPTIONS and provided a SIZE and HEIGHT

  5. The report we selected, titled Customer Location looks like this in the report editor


    Note the use of the runtime filter for the report

  6. When an end user edits a Customer issue, the geospatial information associated with the customer is used to render a map showing the customer’s location

Protecting Embedded Reports

As explained above, embedded reports must be shared or made public to the users who will view these on add and edit screens. However, it is typically important that these reports not be modified or accidentally deleted by users other than the site administrator(s).  Accidental modification of these reports may break a sites workflow.

To avoid this, use the Report Editor Privileges described here to restrict the ability to modify the report to the administor(s) who manage the site’s workflow.

Multiple Embedded Reports on an Add or Edit Layout

You may embed multiple embedded reports on a single add or edit layout.  These reports may be uconnected or can be connected together such that drilldowns from on report may generate the results for a second embedded report within the same add or edit layout and not generate the results of the drilldown in a separate browser tab.

For example, you may have a summary or matrix report generate the drilldown results into a separate embedded layout within the same screen.  To configure this, follow these steps as a guide:

  • Create the first report.  This will typically be a summary or matrix report although other report types are supported.  The report editor will specify any fields to be used as runtime filters for the results.  This report will be saved as a shared public report
  • Create the second report.  This will typically be a column report to display the drilldown results from the first report.  You will use the selected fields from the first report as runtime filters for this second report.  For example, if your first report is a matrix report that displays Priority versus Status, then you would set the Priority and the Status fields as runtime filters in the second report.   This report will be saved as a shared public report
  • Within the Design Center, add embedded report layouts for each of the reports.  Remember to save an empty layout for each of these reports
  • For the first report, add these layout cell attributes as a minimum:

    • EMBEDDED REPORT NAME
    • DRILLDOWN TARGET
    • DRILLDOWN TARGET REPORT
  • For the second report, no layout cell attributes are required, although you may want to add a SIZE, HEIGHT and REPORT OPTIONS to make the layout look correct and similarly styled to the first report.

This will lead to two embedded reports, where, after a drilldown, you will see something like this on your rendered layout: