Repeating Row Layouts

The basic principal of the repeating row layout is that it provides a repeating block of fields, where each block can be added by the user at runtime, or added by business rules, creating additional fields on the screen. For example, you may want to have a row of fields that refer to a sub-issue, assigning part of the issue to an individual. You can create as many rows as needed, to assign different parts of the issue to different people. Each of these may have a field named RELEASE_STATUS, which can be used to follow the workflow you create.

Note: All layouts to be used as repeating row layouts must be created as a repeating row layout type. All fields placed on repeating row layouts must have been created in the data dictionary with the Field Belongs To having a value of Repeating Row records.

You may embed repeating row layouts within an ADD_PROBLEM, EDIT_PROBLEM, EMAIL_FULL, or HISTORY layout. You may also embed a repeating row layout within another layout which is itself to be embedded within one of these layouts.

You can also create UDF’s that are attached to the repeating records, as opposed to being added to the main issue record. Care should be taken when doing this. For example, it is problematic for users and for reporting to add field display types such as Log Area to each line of a repeating record. Log Area fields are therefore not supported on repeating record layouts. The section on the Data Dictionary describes how to set up UDF’s, including UDF’s attached to repeating records.

Note: There is also an important limitation in that you may not place the same field on multiple repeating row layouts. ExtraView cannot differentiate between these fields and incorrect data would be stored if you configured a system that had the same field appear within different repeating row layouts. The design center cannot distinguish this when you are building each repeating row layout, so take care to only use repeating row fields within a single repeating row layout.

At the same time as this limitation, note that if you move a field defined as a repeating row field from within one repeating row layout, to a different layout, the data entered by end users does not follow the field. The data is stored with a connection to the repeating row layout as well as a connection to the field. You may move the field, but data previously associated with the field will not be visible. It is a better practice on a system that already contains data, to create a new field for the new layout, and remove the field from the old layout. In this way any historic values accumulated for the field will still be available.

Permission Keys

The following keys exist for both PR_ADD_PROBLEM and PR_RESOLUTION, having their effect on the Add screen and the Edit screen respectively.

Key Purpose
RELEASE This permission key controls access to all the repeating row layouts that appear within the Add screen and the Edit screens. Giving this key read and write permission for a role enables all the repeating row layouts that appear
ALLOW_ADD_REPEAT_RECORDS This controls the visibility of the Add Another xxx button on the screen. The xxx text is determined by the title to the data dictionary field named RELEASE

Creating a Repeating Row Layout

  1. Create the layout type for the repeating row
  2. Click on Screen and Reports Layouts from the Administration menu, under the Fields & Layouts tab
  3. Use the Add a new layout for the entire system entry to add the new layout type to your current business area, project and role. Note the section at the bottom of the screen that provides the information on creating repeating row layouts. You may either create a new repeating row layout type, or utilize an existing one.


    Creating a Repeating Row Layout

  4. Add fields to the layout, using the layout editor features. An example might be:


    Add Release Layout

    The inbuilt fields that can be added are taken from the following list. Note that these fields may only be placed on a single repeating row layout.

    1. RELEASE_FOUND
    2. RELEASE_FIXED
    3. RELEASE_ASSIGNED_TO
    4. RELEASE_OWNER
    5. RELEASE_PRIORITY
    6. RELEASE_SEVERITY_LEVEL
    7. RELEASE_STATUS – note that this field obeys the workflow rules that you set up with the workflow status rules
    8. RELEASE_OWNER
    9. Any UDF that you have created, which is of the repeating record type. Note that a UDF can only be placed on a single repeating row layout, while the above fields can be placed on any number of repeating row layouts.
  5. Save your current Layout by clicking the Save Layout button.

Adding the Repeating Record Layout to Appropriate Screens

  1. Navigate to the Design Center
  2. For both the Add and Edit screen, you may select LAYOUT.RELEASE from the dropdown list
  3. Choose the particular row to which you want to add the repeating record information by selecting the row from the row dropdown list or by clicking the Insert button to insert a new row
  4. Save your changes and view your results (layout embedded within a layout).


Design Center screen

The Inbuilt RELEASE Repeating Record

Repeating records such as the inbuilt Release layout are not designed to be rendered as individual screens, but designed to be embedded within other layouts. This allows you to create a system that either allows you to have issues that can, for example, have multiple release records within each issue. Different layouts can be designed that can be embedded within both the Add and Edit screens if desired.

You should be aware that you should not create recursion by embedding a layout within itself. Note that if you require a system where you require a single repeating row record (e.g. there is only one release found and one release fixed for each issue) then you should not use a repeating row record.

The inbuilt repeating record named RELEASE contains fields with the following names and default screen titles:

RELEASE_FOUND Version Found
RELEASE_FIXED Version Fixed
RELEASE_SEVERITY_LEVEL Severity Level
RELEASE_PRIORITY Priority
RELEASE_STATUS Status
RELEASE_OWNER Owner
RELEASE_ASSIGNED_TO Assigned To
RELEASE_RESOLUTION Resolution

Each of these fields is protected with a security permission key, one for the add screen and one for the edit and query screens. These are manipulated in the standard way, as explained in the section named Grant Security Permissions.

There is a security permission key that allows you to control the presence or absence of a delete checkbox on the repeating row. This is named PR_RESOLUTION.PROBLEM_RELEASE_DELETE. This key controls the presence of a check box on a repeating row record, that allows the user to delete a complete repeating row. Write access is needed to control the checkbox.

Note: There are two security permission keys, named PR_ADD_PROBLEM.RELEASE and PR_RESOLUTION.RELEASE. These keys control the presence of the entire repeating record, and switch the entire structure on or off for an individual user role. To turn on or off access to the whole repeating record, use the write privilege.

Note: There are two security permission keys named PR_ADD_PROBLEM.ALLOW_ADD_REPEAT_RECORDS and PR_RESOLUTION.ALLOW_ADD_REPEAT_RECORDS that control the visibility of the Add another xxxxxx button beneath the repeating rows on add and edit screen layouts. You can remove the button to stop users in some roles being able to add additional repeating rows, but have users in different roles being allowed to add the repeating rows. The xxxxxx is the title of the data dictionary field named RELEASE. For example, if you provide a title of issue to the field, then the button is named Add another issue.

Unique and non-Unique Repeating Rows

Differing purposes may require you to implement repeating row records which either have or do not have a unique key field. There are two parts to configuring this capability. First, in the Workflow behavior setting screen, use the ENFORCE_UNIQUE_RELEASES setting to switch on the capability of enforcing a unique key field. Second, you must place the field named RELEASE_FOUND on the repeating row record. This normally has a display type of LIST, although TAB and POPUP are also supported. You can re-title the field in the data dictionary to any suitable title you require for your installation. Also, note that the RELEASE_FOUND and the RELEASE_FIXED fields are the child fields where the PRODUCT_NAME field is the parent. This means that if you have the RELEASE_FOUND or RELEASE_FIXED fields on a repeating row record, then you must have the parent PRODUCT_NAME field on the add and edit screens that contain the repeating row record.

Repeating Rows & Workflow Status Change Rules

The ExtraView Status Change Rules features work with the inbuilt RELEASE_STATUS field. The RELEASE_STATUS field is treated the same as the inbuilt STATUS field with Status Change Rules. One aspect of this is that you may have configured the STATUS field to use Status Change Rules, but you are not placing the RELEASE_STATUS field on the RELEASE layout described on this page. In this case, ExtraView still needs to be able to handle the * None * value for the missing RELEASE_STATUS field. To accommodate this, configure the Status Change Rules to accept a * None * value, i.e. it is a legitimate update to allow the status of the issue to be changed to a null value, for the appropriate range of Business Areas, Projects and Roles that are configured.

Repeating Rows & Custom Code

There are occasions when working with repeating rows that it is useful to know which row you are targeting with an event. For example, you may have a popup field that returns a value to a specific field on a repeating row. You will need to know which row to target with the return value. To make this task simpler, there is a JavaScript function available on add and edit layouts that you can call from an HTML modifier to any cell. This function is named getRowNumber and is used in this way:

var rowNum = getRowNumber(this, this.form);

This function returns the following in rowNum:

-1 if the field is a singleton repeating row
0nn if the field is in a repeating row with 2 or more rows, where nn indicates which row the field is in.

Field Limitations on Repeating Row Layouts

Repeating row layouts do not support –

  • Log Area display type fields
  • Multi-value display type fields
  • Any data dictionary field that does not have the Field belongs to value set to Repeating Records
  • Any one field cannot be placed on multiple repeating row layouts, whether it is an inbuilt or user defined field. Take care when configuring your layouts as no error can be detected at design time.

A Note on how Repeating Rows are Managed

As far as possible, repeating rows are added and updated on an add or edit screen using Ajax. This provides the best performance possible. There are some cases where ExtraView cannot use Ajax, and in this case all the repeating rows have to be re-rendered upon a change. This usually occurs if there are field differences between what is rendered on the page and what will be on the newly added record.

For example, suppose you have a FIELD/LAYOUT VISIBLE IF layout cell attribute on a field and the parent field is also on the same repeating row. It is possible that you can make the field invisible on all the rows. When this happens, ExtraView does not display the title for that field and suppress the entire column. If adding a new row makes the invisible column visible, then ExtraView needs to re-draw the entire set of repeating rows.

The following cases show where ExtraView forces a complete rendering of the repeating row layout, as opposed to an Ajax refresh of just a single row:

  • The repeating row layout is placed under an embedded layout as the first row in the embedded layout. In this case, there is not a row with the ID of the repeating row in the browser DOM when ExtraView renders the upper-level sublayout. Hence the complete repeating row layout must be rendered.
  • The Ajax refresh causes a column to be added or removed from the display. For example, suppose you have a Visible If condition on FIELD_A and you have 2 rows on the repeating row layout and FIELD_A is visible on both rows. FIELD_A is on a column by itself within the repeating row layout. Change the Parent value on row 1 to make FIELD_A invisible. The Ajax call takes place and makes the field invisible. Change the Parent value on row 2 to make FIELD_A invisible on row 2. This Ajax call will force the rendering of the entire repeating row. ExtraView does this because the column for FIELD_A will be suppressed if FIELD_A is invisible on all rows.